Skip to content
CryptoLookoutCryptoLookout
FREN
CRYPTOTUTOS · LEARN WITH SHORT VIDEOS

CryptoTutos.
Your alerts, explained.

Seven short videos to understand levels, indicators and reminders. All examples are fictional. English subtitles and complete explanations let you follow along without sound.

Each video takes less than a minute. Learn at your own pace, with the terminology, examples and limitations of each rule.

01 · 48 SECONDS

Prices, thresholds and percentage change

French video · English subtitles and full transcript.

Read the text version

Distinguish the price from the threshold

A price is an observed value. A threshold is a level you choose as a reference to monitor that price.

Read upper and lower thresholds

In this fictional example, an upper threshold of 105 is met at 105 or above: price ≥ threshold.

A fictional lower threshold of 95 is met at 95 or below: price ≤ threshold. Equality counts too.

Calculate a percentage change

From 100 to 105, the change is +5%. The calculation is (ending value − starting value) / starting value × 100: divide the difference by the starting value, which is the basis of the calculation.

Keep distance and percentage change separate

A five-percent distance sets a fixed target price. The percentage-change signal compares the two most recently received closing values. A percentage distance is therefore different from a rolling percentage change.

Check the rule and keep the decision

Choose a reference you understand and check the pair, unit and condition in your rule. Like a doorbell that cannot choose whom you let in, an alert supplies information without deciding for you. Information is not an instruction: the decision remains yours.

Compare price and percentage-change rules →

02 · 42 SECONDS

Volume and relative volume

French video · English subtitles and full transcript.

Read the text version

What volume measures

Volume measures a quantity traded on a market over a period. Its unit depends on the data supplied. It does not count the people trading.

Calculate relative volume

In this fictional example, average volume is 100 units and the latest volume is 150 units. Relative volume is 150 / 100 = 1.5 × the average.

Interpret the ratio

Relative volume of 1.5 × means volume exceeds the average by half, or 50%. A ratio of 2 × means double. Always identify the basis of comparison.

Compare consistent periods

An average depends on its reference period. Compare the same pair, on the same exchange and with the same candle interval. Read the reference shown in your rule or card.

Distinguish volume change from relative volume

Volume change compares two consecutive periods: from 100 to 150 units, the change is +50%. Relative volume compares the latest period with an average. A consecutive change and a ratio to an average therefore describe different comparisons.

What volume cannot predict

High volume can accompany a rising or falling price. Just as more noise cannot reveal the direction of the next step, high volume does not predict the direction of the next move.

Read the volume alerts guide →

03 · 40 SECONDS

Understanding the RSI

French video · English subtitles and full transcript.

Read the text version

What the RSI describes

The RSI compares the strength of recent upward and downward moves. Its value ranges from 0 to 100. It represents neither a price nor a probability.

Understand the 14 periods

RSI 14 smooths gains and losses over 14 periods of the selected interval. The duration therefore depends on that interval: 14 one-hour periods do not represent 14 days.

Read the 30 and 70 reference levels

Thirty and seventy are common reference levels: at 30 or below, the RSI is in the lower zone; at 70 or above, it is in the upper zone. The terms “oversold” and “overbought” describe these zones and are not instructions to buy or sell.

Avoid assuming an automatic return

A high RSI can stay high during a strong trend, and a low RSI can stay low. An automatic or immediate return to the middle is not guaranteed.

Keep the context and your decision

The RSI describes a situation according to its calculation and adds context to your observations. It does not take the wheel for you: observe the context and keep the decision yours.

Read the RSI alerts guide →

04 · 42 SECONDS

Breakout, breakdown and range

French video · English subtitles and full transcript.

Read the text version

Recognize a range

A range is a recent price zone between a lower boundary and an upper boundary. In this fictional example, the corridor extends from 95 to 105.

Understand a breakout

A breakout is a price move above the corridor’s upper boundary. The word describes the exit, not the rest of the journey: it does not guarantee that the rise will continue.

Understand a breakdown

A breakdown is a price move below the corridor’s lower boundary. A downward exit does not guarantee a lasting or endless decline.

Read the rule’s settings

The engine calculates the boundaries over a historical window, then checks the requested exit. The structural rule uses this historical zone, a direction and a margin. An optional volume condition may also be required.

Distinguish a fixed threshold from a calculated boundary

A price threshold is a chosen level; a range break depends on boundaries calculated from historical data. The engine compares the received closing value with the adjusted boundary: the value must lie beyond that boundary in the chosen direction. A range break is therefore more than a fixed threshold.

Allow for a return into the range

After leaving the corridor, the price can return to it. The door was open, but the journey was not promised: the signal describes a condition without guaranteeing a gain.

Read the range breakout guide →

05 · 49 SECONDS

Support, resistance and pullbacks

French video · English subtitles and full transcript.

Read the text version

Support: a lower reference

Support is a reference derived from low prices observed in the past. This drawn floor can be crossed: support can fail and is not a guaranteed floor.

A bounce from support

The support-bounce rule looks for an approach to the support zone followed by values returning above the reference. It checks the approach and return using the specified margins and confirmations.

Resistance and rejection

Resistance is an upper reference. The rejection rule looks for an approach to this zone followed by values returning below it. A drawn ceiling can also be crossed.

What the margins do

Margins set the approach tolerance for the zone and the required return around the reference. They define the condition without guaranteeing a bounce or what the movement does next.

A pullback and a resumption

A pullback is a retracement, a backward movement within a trend. Just as moving backwards does not always mean making a U-turn, a retracement alone does not establish a change of direction. A resumption must still be observed; it is not automatic.

What the resumption rule combines

The engine combines a trend defined by two moving averages, fast and slow, a pullback in the preceding candle and a resumption condition for the current value. The averages and return conditions therefore form parts of the same rule.

References that can be invalidated

Support, resistance and pullbacks help describe a situation, but the market can invalidate them. They guarantee neither a bounce nor a result. Observation and decision remain two separate steps.

Explore market-structure references →

06 · 42 SECONDS

The 20-period simple moving average

French video · English subtitles and full transcript.

Read the text version

Calculate the 20-period simple moving average

The 20-period simple moving average, or SMA20, is the mean of the latest 20 closing values: add those values and divide their sum by 20. Its French abbreviation is MM20.

Move the window forward

With each new observation, the window moves forward: the oldest value leaves, the newest enters and the average is recalculated.

Relate the 20 periods to elapsed time

With consecutive, complete candles, 20 fifteen-minute candles span 5 hours; 20 one-hour candles span 20 hours; 20 one-day candles span 20 days. The time represented therefore depends on the candle interval.

Understand smoothing and lag

Rapid variations carry less weight in the average: it smooths movements and reacts with a lag. It is a smoothed rear-view mirror, not a crystal ball; it does not predict the next price.

Separate the price, average and threshold

A price is an observation; an average is a calculation summarizing a window; a threshold is a chosen level. These are three different references: check which ones your rule compares.

Check the exact comparison

An average above a threshold and a price above its average are different conditions. Read the compared value and the target in your rule, then check the selected comparison before deciding.

Find the SMA20 definition →

07 · 55 SECONDS

Candles, intervals and reminders

French video · English subtitles and full transcript.

Read the text version

Read a candle’s four price values

A candle summarizes four price values: open, high, low and close. Its body connects the open and the close.

Distinguish an open candle from a closed candle

The interval defines a candle’s duration: a one-hour candle summarizes one hour. While that period is in progress, its values can still change until the period ends. A candle in progress and a closed candle are therefore different.

Understand the cadence of checks

The candle interval defines the observed period. The selected setting provides a base cadence; reminders or technical retries may trigger earlier checks, without guaranteeing an immediate send or receipt.

The planned initial delay for the first check still follows that base cadence. Earlier checks do not change the candle interval.

Read the reminder delay

The reminder controls repeated messages while a condition remains true. Its delay is measured from the last recorded send: a reminder set to six hours becomes possible after that delay if the condition is still true when checked.

Distinguish periodic follow-up

Periodic follow-up requests regular information about a pair. It follows a rhythm without waiting for a price threshold to be reached or a range break to occur.

Separate evaluation, sending and receipt

Evaluation, sending and receipt are three stages. A true condition does not guarantee instant receipt: data, the service and the messaging channel must be available and respond.

Review the three settings

Keep three distinct concepts in mind: the candle defines the observed duration; analysis corresponds to the time of evaluation; the reminder controls a possible repeat. Your rule’s card retains the settings you selected: review them.

Open the general glossary →

The words behind the charts

Explore 45 concepts with French–English definitions in the glossary.

Open the glossary